Wireless Home Alarm Systems Problems-incubus

Home-Securtiy Wireless home alarm systems are a great deterrent against the rising number of home break-ins that are occurring today. However, as with anything else, they can have their problems as well. Some of the most common problems associated with alarm systems are really quite simple to troubleshoot. One is a system that is not arming. This is usually due to either a door or a window that is connected to the alarm system. They are often not completely closed and this prevents the alarm system from arming. Another thing that must be done correctly is the entering of the code in correct sequence. If this is entered incorrectly, the system will not arm. When the alarm system is first installed, this can be a matter of getting used to the code that must be entered. Another problem often experienced by those who have new wireless home alarm systems installed is learning what it is trying to tell you when different color lights flash on the control panel. This can be where the instruction manual for your specific alarm will come in very handy. The green light often means that the system’s batteries are low or it has lost the external power source. A flashing red light usually means the system has been in alarm mode. Either problem can be fixed by resetting the alarm system. There are alarms companies today that are advertising a new home security system that does not charge monthly fees. How does this service work and can it protect your home? The idea is based on a system that automatically dials four emergency numbers that have been pre-set in the event the alarm is tripped. The system also triggers flashing lights and high pitched sirens as part of the security in hopes that this will scare off an intruder. These wireless home alarm systems do not offer the protection needed because they do not protect against other problems such as fire, carbon monoxide and other threats as the typical alarm system does. They are also prone to dropped calls, busy signals and the like. With an alarm system that is connected to law enforcement, there are many phone lines and connections that make dropped calls far less likely. Therefore, a typical alarm system should be chosen over one that depends on pre-set numbers to take care of a problem. Another problem that can be experienced when installing wireless home alarm systems is upon arriving home and putting in your code to deactivate the alarm it does not deactivate. The first thing is – don’t panic! Most alarm systems have a delay that will allow you to enter your code again as the manufacturers know it is easy to accidentally enter the wrong number. If you cannot deactivate the alarm, call the monitoring service and let them know what is happening and refer to your owner’s manual for troubleshooting tips. If it is really malfunctioning, you may have to get the alarm company to repair the system. Today many people are using VoIP phones. Before purchasing wireless home alarm systems, you may want to check that the one you are choosing is compatible with a VoIP phone. Many are not. They are designed for use with land lines. The digital signal used by a VoIP phone must be converted to an analogue signal and if it is not, communication problems will be experienced. Another problem with using these types of phones is if there is no power, the phone will not work. Wireless home alarm systems have back up power, but most computer modems do not. If you want to prevent this from occurring, purchasing a back up power source for the computer’s router and modem can rectify this problem. Signal problems can be experienced. More often than not checking for interference from outside sources or even the phone line itself can remedy these problems. Often replacing a phone line can help. Wireless home alarm systems are much more secure than wired systems because they can be made harder for a thief or burglar to locate. Thus, they cannot simply unplug the phone line or rip the system from the wall. More often than not, a problem with the system is just something simple. The failure to make certain that all the doors and windows are secured before activating the alarm is one. Making certain that all family members know how to operate the system will ensure the alarm is working when it should. About the Author: 相关的主题文章: